Chapter 4. Illustrated Parts List; Section 1. Introduction; General; Purpose - Hobart 60PL20 Operation And Maintenance Manual

CHAPTER 4. ILLUSTRATED PARTS LIST

SECTION 1. INTRODUCTION

1. General

The Illustrated Parts List identifies, describes, and illustrates main assemblies, subassemblies, and detail
parts of the engine-driven generator sets manufactured by Hobart Brothers Company, Power Systems
Group, Troy, Ohio, 45373. These sets are identified as Hobart Specification No. 7009-1, Specification No.
7009A-1, and Specification No. 7009B-1.

2. Purpose

The purpose of this list is to provide parts identification and descriptive information to maintenance and
provisioning personnel for use in provisioning, requisitioning, purchasing, storing, and issuing of spare
parts.

3. Arrangement

Chapter 4 is arranged as follows:
Section 1 - Introduction
Section 2 - Manufacturer's Codes
Section 3 - Parts List
Section 4 - Numerical Index

4. Explanation of Parts List

A. Contents
The parts list contains a breakdown of the equipment into assemblies, subassemblies, and detail parts.
All parts of the equipment are listed except:
(1) Standard hardware items (attaching parts) such as nuts, screws, washers, etc., which are avail-
able commercially.
(2) Bulk items such as wire, cable, sleeving, tubing, etc., which are also commercially available.
(3) Permanently attached parts which lose their identity by being welded, soldered, riveted, etc., to
other parts, weldments, or assemblies.
December 31/91 Revised
OM-2053
4-1
Page 1