Installing The Rj11 Cable - Toshiba Satellite L670D Maintenance Manual

4.11 USB Board
3. Pry up the RJ11 connector with a flat blade screwdriver and remove it from the trough on
the logic lower assembly.

Installing the RJ11 Cable

Install the RJ11 cable according to the following procedures.
1. Seat the RJ11 connector in the trough on the logic lower assembly.
2. Route the cable in the routing channel on the logic lower assembly.
3. Attach the tape on the logic lower assembly.
Figure 4.33 Removing the RJ11 connector
[CONFIDENTIAL] Satellite L670D/L675D/Pro L670D Maintenance Manual
4 Replacement Procedures