Pentax AF-360FGZ Operating Manual page 43

00_AF360FGZ.book Page 41 Tuesday, June 13, 2006 12:09 PM
When Using Both an AF360FGZ Attached to the Camera and a Separated Flash Unit as
Main Flashes
Use both flash units as main flashes
(Preparation of Flash Unit Attached to Camera)
1
Firstly, set the wireless mode and channel of the
AF360FGZ attached to the camera, and register
the channel on the camera.
 Attach the AF360FGZ to the hot shoe of the
camera after turning the camera off.
 Set the power switch of the flash unit to
(WIRELESS).
 Set the wireless mode switch to (M), so that
MASTER is displayed in the upper right corner
of the LCD panel.
 Slide down the setting switch to the (yellow
dot) to display the channel on the LCD panel.
 Press the channel button (CH) and select a
channel from 1CH to 4CH.
41