Song; Listening To The Songs; Song Control; Lesson Mode - Kurzweil KP-100 User Manual

Song

The instrument has a variety of songs, use [+/YES]/ [-/NO] button and
data dial to select a song. All songs can be practised in the lesson mode.
Listen to the songs
1.
Press the [SONG] button to enter the song mode. All songs will play
circularly.
2.
Use the [+] or [-] button to select a song.
3.
During song playback, press [SONG] or [START/STOP] to stop the
playback.
When the song stops, press the [START/STOP] button, it will play the
current song repeatedly.
4.
When the song stops, press the [STYLE] or [VOICE] button to exit the
song mode.

Song Control

1.
Introductory Beat
Before song starts playing, it has the introductory beat; the measure
starts from negative value. It begins to play the melody when the
measure goes to 1.
2.
REW, FF and PAUSE
When the song is playing:
Press the [ ] button to fast forward the song.
Press the [ ] button to rewind the song (base on the measure).
Press the [ ] button to pause the playing song, press again to
continue playing.
3.
Song Repeat
When playing the song, press the [
section of the current song, then press it again to set the loop end.
During loop playback, press the same button to quit the loop and go
back to song playback.

Lesson Mode

Control buttons in the lesson mode: [SHIFT] + [LESSON], [SHIFT] + [L],
[SHIFT] + [R] and [SHIFT] + [L] + [R].
1.
Enter the lesson mode
While the song stops, holding down the [SHIFT] button and press the
[LESSON] button.
2.
Select the practice hand.
All songs can be practised in three types: time training, note training
and performance mode. The grading system will help you keep track
of your progress.
Use [SHIFT] + [L], [SHIFT] + [R] or [SHIFT] + [L] + [R] button to select
the lesson you want to practice. Alternatively, the keyboard will
automatically select the right hand practice for you.
26
] to set the beginning for a loop
START/ SYNC INTRO/
STOP START ENDING FILL A FILL B
SHIFT