Installing The Battery - Pentax Optio W30 Operating Manual

2
Battery
lock lever

Installing the Battery

Use the battery that is provided with the camera. Charge the battery
before using it in the camera for the first time.
1
Open the battery/card cover.
While pressing the battery cover lock lever in the direction of 1, slide
the battery/card cover in the direction of 2 and flip the cover open in
the direction of 3.
2
Using the side of the battery to press the battery lock lever
in the direction of 4, insert the battery with the side with
the PENTAX logo pointing toward the back of the camera.
Push the battery in until it is locked in place.
3
Close the battery/card cover.
Slide the battery/card cover in the opposite direction of 2, and push it
in until it clicks to ensure it is securely locked.
Removing the Battery
1
Open the battery/card cover.
2
Release the battery by using your finger to press the
battery lock lever in the direction of 4.
The battery will be ejected. Pull the battery out of the camera.
• Do not apply excessive pressure to the front or back of the camera
when opening and closing the battery/card cover as this may dislodge
the waterproof packing. If the packing is not in the correct position, the
waterproof performance of the camera will be compromised.
• If the battery/card cover is not locked securely when you close it,
water, sand, or dirt may enter the camera.
Battery cover lock lever
1
1
23