Samsung PM32F User Manual page 67

Chapter 5. Menu
System ▼
2nd 3rd
Standby Control
Network Standby
Power Button
Eco Solution Energy Saving Mode
Eco Sensor
Screen Lamp Schedule
No Signal Power Off
Auto Power Off
Description
You can set the screen standby mode to be applied when an input signal is received.
• Available only DVI, HDMI, DisplayPort
• Ensure that the source device is connected correctly when the
• If No Signal Message is set to Off, the
Message to On.
This feature keeps the network power on when the product turns off.
The power button (on the top left corner of the remote control) can be set to either turn on the power or turn on/off
the power.
Reduce the power consumption by adjusting the screen brightness.
To enhance your power savings, the picture settings will automatically adapt to the light in the room.
• Adjusting the Backlight setting in the
• If Eco Sensor is On, the display brightness may change (become slightly darker or brighter) depending on the
surrounding light intensity.
Adjust the panel brightness. A value closer to 100 makes the panel brighter.
Save power by turning the device off when no signal is received from any source.
• Disabled when an attached PC is in power saving mode.
• The product will automatically power off at a specified time. The time can be changed as required.
The product will automatically turn off if you don't press a button on the remote or touch a button on product front
panel within select hours to prevent overheating.
mode.
Signal is weak or no signal
Signal is weak or no signal message does not appear. Set
Picture menu disables the Eco Sensor.
67
message appears.
No Signal