Samsung PM32F User Manual page 66

Chapter 5. Menu
System ▼
2nd 3rd
Power On Delay
Auto Source Switching
Auto Source Switching
Primary Source Recovery
Primary Source
Secondary Source
DVI Connection
Power Control Auto Power On
PC Module Power
Max. Power Saving
Description
When connecting multiple products, adjust the power-on time for each product to prevent power overload (within
the range 0–50 seconds).
Turning on the display with Auto Source Switching
display will automatically search the different video input sources for active video.
When the Auto Source Switching is On, the display video source will automatically be searched for active video.
The Primary Source selection will be activated, if the current video source is not recognized.
Secondary Source selection will become active, if no primary video source is available.
If both the primary and secondary input sources are not recognized, the display will perform two searches for an
active source, each search checking the primary and then secondary source. If both searches fail, the display will
return to the first video source and display a message indicating that there is no signal.
When the Primary Source selection is set to All, the display will search all the video source inputs twice in sequence
looking for an active video source, returning back to the first video source in the sequence if no video is found.
Select whether to restore the selected primary input source when a primary input source is connected.
• The Primary Source Recovery function is disabled if
Specify Primary Source for the automatic input source.
Specify Secondary Source for the automatic input source.
Select the source device that is connected to the DVI input.
• Restart the source device if the screen is not displayed.
This feature automatically turns on the product as soon as it is plugged in. Pressing the power button is not needed.
The PC module can be turned on/off separately from the LFD.
Turns off the product to reduce power consumption after the PC has been left idle for a specified period of time.
• Available only DVI, HDMI, DisplayPort
On, and the previous video source selection is not active, the
Primary Source is set to All.
mode.
66