Video Wall Mode Control 0X5C 0~1 - Samsung PM32F User Manual

Chapter 2. Device setup
Setting auto adjustment (Set Auto Adjustment)
Header Command ID
0xAA 0x3D
"Auto Adjustment" : 0x00 (at all times)
Ack
Header Command ID Data
length
0xAA 0xFF 3
Nak
Header Command ID Data
length
0xAA 0xFF 3
"ERR" : A code showing what error has occurred.
Video Wall Mode Control
Function
• Video Wall mode can be activated on a product using a PC.
• This control is only available on a product whose
Viewing video wall mode (Get Video Wall Mode)
Header Command
0xAA 0x5C
Data Data Checksum
length
1 "Auto
Adjustment"
Ack/ r-CMD Val1 Checksum
Nak
'A' 0x3D "Auto
Adjustment"
Ack/ r-CMD Val1 Checksum
Nak
'N' 0x3D "ERR"
Video Wall is enabled.
ID Data length Checksum
0
Setting the video wall (Set Video Wall Mode)
Header Command ID
0xAA 0x5C
"Video Wall Mode": A code used to activate Video Wall mode on a product
• 1: Full
• 0: Natural
Ack
Header Command ID Data
length
0xAA 0xFF 3
"Video Wall Mode": A code used to activate Video Wall mode on a product
Nak
Header Command ID Data
length
0xAA 0xFF 3
"ERR" : A code showing what error has occurred.
Data Data Checksum
length
1 "Video Wall
Mode"
Ack/ r-CMD Val1 Checksum
Nak
'A' 0x5C "Video Wall
Mode"
Ack/ r-CMD Val1 Checksum
Nak
'N' 0x5C "ERR"
26