Seat Belt Extender - Fiat 500 Owner's Manual

NOTE: After entering the Menu, an action must be
taken within 45 seconds or the Menu will disappear.
1. Turn ignition to the ON/RUN or START position.
2. Press the appropriate Customer Programmable But-
tons located on the Instrument Cluster as follows.
3. Press the MENU Button (bottom button). The Menu
items will appear on the display.
4. Press the UP or DOWN Button (top or middle button).
The "Belt Buzzer" item will appear on the display.
5. Press the MENU Button (bottom button). The "Belt
Buzzer: OFF" item will display.
6. Press the UP or DOWN Button (top or middle button).
The "Belt Buzzer: ON" item will display.
7. Press the MENU Button (top button). The "Belt
Buzzer: ON" item will be saved and removed from the
Menu List.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 37
BeltAlert can be disabled again by your authorized
dealer. Vehicle owners are not able to disable BeltAlert .

Seat Belt Extender

If a seat belt is too short, even when fully extended, and
when the adjustable upper shoulder belt anchorage (if
equipped) is in its lowest position, your authorized
dealer can provide you with a seat belt extender. This
extender should be used only if the existing belt is not
long enough. When it is not required, remove the ex-
tender and store it.
2