Updating cartridge firmware
The minimum supported iLO CM firmware version for use with this cartridge is iLO Chassis Manager
Firmware version 1.20.
A system ROM flash does not take effect on a node until the node is rebooted. The iLO CM firmware will
reflect the system ROM flash immediately.
To update the firmware:
Verify the firmware version by entering one of the following commands:
1.
show firmware revisions all
show firmware revisions list
Download the latest firmware version from the HP Moonshot Component Pack download site
2.
(http://www.hp.com/go/moonshot/download).
For more information on updating the firmware, see the HP Moonshot iLO Chassis Management CLI User
Guide in the HP Moonshot Information Library (http://www.hp.com/go/moonshot/docs).
Registering the product
To experience quicker service and more efficient support, register the product at the HP Product Registration
website (http://register.hp.com).
Setup 19