Getting Started; Trajectory Ball; First Call; Mounting The Sim Card - Spice QT-65 User Manual

GETTING STARTED

Trajectory ball

Slide the trajectory ball towards right to access the submenu and slide towards left to access
the superior menu. Press your trajectory ball to get into the current menu. In standby mode,
sliding the ball to left or right enables you to access the shortcuts icon at the bottom of the
screen. Slide it up and down to see your own interface, such as the time, your operator
name, calendar or just your desktop wallpaper.

First Call

Insert a SIM card (Switch off your phone, and then remove the battery). Enter the area
code and the phone number and press Pick Up Key.
Tip: Before you get started, please insert a valid SIM card in your phone and charge the
battery first.
SIM Card: Please refer to "Mounting the SIM Card" for more reference on installation.
Charging the battery: please refer to "Charging the battery" for more details.

Mounting the SIM Card

Your mobile phone number, PIN (Personal Identification Number), PIN2, PUK (Personal
Unlock Key), PUK2 (Personal Unlock Key2), IMSI (International Mobile Subscriber Identity),
the network information, the phonebook data, SMS (short messages) and other data are
stored in your SIM card.
Note: This particular phone model supports the SIM cards of 1.8V and 3V only.
Some network operators don't offer PIN2 and PUK2, so functions using those passwords
will be unavailable.
The SIM card and its contacts can be damaged by scratches or bending easily, so be
careful while handling, inserting or removing the card.
Keep all miniature SIM cards out of the children's reach.
Note: Always make sure that your phone is switched off before you insert or remove the SIM
card, otherwise it may damage the SIM card.
Mounting
Remove the battery cover by sliding it. Insert the SIM card, with the notch at the bottom right
and the gold contacts face down, into the card slot. Align the card to the arrow sign as the
following picture shows:
9