Table of Contents
Advertisement
Inserting the SIM card,
microSD™ card, and battery
When you register with a service provider, you
receive a Subscriber Identity Module (SIM)
card. Your phone must have a SIM card in order
to make calls. The SIM card is a computer chip
that contains your phone number, phonebook
information, and service provider information.
Handle it with care and do not bend it or expose
it to static electricity or dirt. Be sure the power
to your phone is off before you insert your SIM
card.
The SIM card slot is situated underneath the
battery.
To insert the SIM card:
1. Slide the cover in the
direction of the arrow.
Lift and set it aside.
2. Pull the protruding film
on top of the battery
in the direction of the
arrow, then carefully
lift the battery out of its
compartment.
Getting started
To insert the microSD™ card:
NOtE: In some regions the microSD™ card may be supplied as
an optional accessory only.
3. Insert the SIM card into
the holder. The gold
contacts of the SIM card
should face down.
1. Place the microSD™
card in the slot with
the gold contacts
facing down.
2. Place the battery
back into the battery
compartment noting
the correct polarity.
3. Replace the back
cover, sliding it
upward until it snaps
in place.
7
Advertisement
Table of Contents
