Electrical Connections; Power Supply; Ethernet Interface X1P1 - Siemens SIMATIC NET S7-1200 Operating Instructions Manual
Hide thumbs
Also See for SIMATIC NET S7-1200:
- Operating instructions manual (98 pages) ,
- Compact operating instructions (50 pages) ,
- Operating instructions manual (55 pages)
Table of Contents
Advertisement
3.3
Electrical connections
3.3.1
Power supply
Power supply
The CM is supplied with power from the backplane bus. It does not require a separate power
supply.
3.3.2
Ethernet interface X1P1
Ethernet interface
The Ethernet connector is located behind the lower hinged cover of the module. The
interface is an RJ-45 jack according to IEEE 802.3.
The pin assignment and other data relating to the Ethernet interface can be found in the
section Technical specifications (Page 63).
CP 1243-1 DNP3, CP 1243-1 IEC
Operating Instructions, 02/2014, C79000-G8976-C312-02
LEDs and connectors
3.3 Electrical connections
23
Advertisement
Table of Contents
