How Do I Set Up A Conference Call; How Do I Use Call Waiting - Cisco 7902G Quick Start Manual

How Do I Set Up a Conference Call?

To turn a two-party call into a conference call, follow these
steps:
During a call, press the Conference feature button.
Step 1
Doing so automatically activates a new line and puts
the first party on hold.
Place a call to another number or extension.
Step 2
When the call connects, press Conference again to add
Step 3
the new party to the conference call.
Note

How Do I Use Call Waiting?

If you are on a call when another a call comes in, you will hear
a call waiting tone or see the indicator light on the handset
flashing, depending on the configuration of your phone.
To answer the new call:
Press the Hold button.
Step 1
When you do so, the original call is put on hold.
To return to the original call, press the Hold
Step 2
button.You can continue to use the Hold button to
switch between the calls.
14
Once the conference call initiator disconnects,
no additional parties can be added.