Pre-Installation Checklist; Identifying Specific Installation Locations; Temperature And Humidity Requirement - Alcatel-Lucent OAW-AP Installation Manual

De plus, les utilisateurs devraient aussi être avisés que les utilisateurs de radars de haute puissance sont
désignés utilisateurs principaux (c.-à-d., qu'ils ont la priorité) pour les bandes 5250-5350 MHz et 5650-
5850 MHz et que ces radars pourraient causer du brouillage et/ou des dommages aux dispositifs LAN-EL.

Pre-Installation Checklist

Before installing your OAW-AP access point, be sure that you have the following items:
•
4- or 8-conductor, CAT5 or better UTP cable of required length.
•
One of the following power sources:
 IEEE 802.3af-compliant Power over Ethernet (PoE) source (The POE source can be any power
source equipment (PSE) controller or mid-span PSE device.
 48 V/0.6A DC AP AC-DC adapter kit (sold separately)
•
A terminal or a notebook

Identifying Specific Installation Locations

You can mount the OAW-AP on a ceiling rail (using the included bracket) or on a wall (using the wall mount
adapter, sold separately). You should first determine the location of the installation. The installation
position is located at the center of the required coverage area and should be free from obstructions or
obvious sources of interference.
•
Minimize the number of obstructions (such as walls) between the AP and user terminals.
•
Electronic equipment or devices (such as microwave ovens) which may produce radio frequency noise
should be away from the installation position of the AP.
It is strictly prohibited to install around stagnant water, water seepage, leakage or condensation. Avoid
cable condensation or water seepage along the cables connecting to the AP.

Temperature and Humidity requirement

•
Operating temperature: 32ºF to 113ºF(0ºC to 45ºC )
•
Storage temperature: -40ºF to 158ºF(-40ºC to 70ºC)
•
Relative Humidity: 5% to 90% non-condensing
OAW-AP Installation Guide
ALCATEL-LUCENT ENTERPRISE
5