Stihl MSE 220 Instruction Manual page 27

The kickback tendency of the saw is
increased if the depth gauges are too
low.
Sharpening Tools (special accessories)
Chain pitch Round file ^
inch (mm) mm (inch)
1 5
/4 (6,35) 4,0 (
3 5
/8 P (9,32) 4,0 (
3
0.325 (8,25) 4,8 (
3 13
/8 (9,32) 5,2 (
1)
consisting of file holder with round file, flat file and filing gauge
MSE 220
Place the filing gauge on the chain –
N
the highest point of the depth gauge
must be level with the filing gauge.
RSC3, RMC3, PMC3, PMMC3
The upper part of the humped drive link
(with service marking) is lowered along
with the depth gauge.
Round file
Part No.
/32) 5605 772 4006
/32) 5605 772 4006
/16) 5605 772 4806
/64) 5605 772 5206
File holder Filing gauge
Part No. Part No.
5605 750 4327 1110 893 4000
5605 750 4327 1110 893 4000
5605 750 4328 1110 893 4000
5605 750 4329 1110 893 4000
The other parts of the triple-humped tie
strap and humped drive link must not be
filed since this may increase the
kickback tendency of the saw.
After sharpening, clean the chain
N
thoroughly, remove filings or
grinding dust – lubricate the chain
thoroughly.
Before a long out-of-service period,
N
clean the chain and store it in a well-
oiled condition.
Flat file Sharpening kit
Part No. Part No.
0814 252 3356 5605 007 1027
0814 252 3356 5605 007 1027
0814 252 3356 5605 007 1028
0814 252 3356 5605 007 1029
English
1)
25