Restarting The System - Cisco Service Manual Service Manual

Cisco TelePresence SX20 Quick Set
Contents

Restarting the system

The system can be shut down or restarted remotely using the
web interface.
D14908.02 SX20 Administrator Guide TC6.0, JANUARY 2013.
Introduction Web interface Web interface
Navigate to: Maintenance > Restart
Restarting the system
Click Restart TelePresence device
restart the system.
It will take a few minutes before
the system is ready for use.
System settings
to
Shutting down the system
Click Shutdown TelePresence device
shut down the system.
The system cannot be turned on
again remotely; you must press
its power button physically to
turn it on.
www.cisco.com — Copyright © 2012-2013 Cisco Systems, Inc. All rights reserved.
45
Administrator Guide
Setting passwords Appendices
to