Cisco TelePresence SX20 Quick Set
Contents
Starting the web interface
The web interface provides full configuration access to your
video conference system.
You can connect from a computer and administer the system
remotely.
In this chapter you will find information how to use the web
interface for system configuration and maintenance.
Browsers:
• The latest releases of Internet Explorer, Mozilla Firefox,
Opera, Chrome or Safari are recommended
• Major TC6.0 functionality works with Internet Explorer 7
D14908.02 SX20 Administrator Guide TC6.0, JANUARY 2013.
Introduction
Web interface
Web interface
1. Connect to the video system
Open a web browser and enter the IP address of
the video system in the address bar.
To find the IP address (IPv4 or IPv6), tap
Settings (
or navigate to
System information
control and the on-screen menu.
System settings
)
on a Touch controller;
Home > Settings >
when using a remote
2. Sign in
Enter the user name and password for your video
system and click
11
Setting passwords
Sign
In.
The system is delivered with a default user
named admin with no password (i.e. leave the
Password
field blank when signing in for the first
time).
We strongly recommend that you set a
password for the admin user, see the next page.
www.cisco.com — Copyright © 2012-2013 Cisco Systems, Inc. All rights reserved.
Administrator Guide
Appendices
Signing out
Hover the mouse
over your user
name and choose
Sign out
from the
drop-down list.