Electromagnetic Compatibility (Emc) - HoMedics CIRCULATION PRO Instruction Manual

13-0095 CB200-CA_IM_E_vE.qxd:Layout 1
IMPORTANT INFORMATION
Electro Magnetic Compatibility (EMC)
1. CIRCULATION PRO needs special precautions regarding EMC and needs to be installed and put into service
according to the EMC information provided in the ACCOMPANYING DOCUMENTS;
2. Portable and mobile RF communications equipment can affect CIRCULATION PRO.
3. Warning that the use of accessories, transducers and cables other than those specified with the exception
of transducers and cables sold by the manufacturer of the CIRCULATION PRO as replacement parts for
internal components, may result in increased EMISSIONS or decreased IMMUNITY of the CIRCULATION PRO.
4. Warning that the CIRCULATION PRO should not be used adjacent to or stacked with other equipment.
Guidance and manufacturer's declaration – electromagnetic emissions
The CIRCULATION PRO is intended for use in the electromagnetic environment specified below. The
customer or the user of the CIRCULATION PRO should assure that it is used in such an environment.
Emission test
RF emissions
CISPR 11
RF emissions
CISPR 11
Harmonic emissions
IEC 61000-3-2
Voltage fluctuations/
flicker emissions
IEC 61000-3-3
7/2/13
Compliance Electromagnetic environment – guidance
The CIRCULATION PRO uses RF energy only for its
internal function. Therefore, its RF emissions are
Group 1
very low and are not likely to cause any interference
in nearby electronic equipment.
Class B
The CIRCULATION PRO is suitable for use in all
establishments, including domestic establishments
Class A
and those directly connected to the public low-
voltage power supply network that supplies
buildings used for domestic purposes.
Complies
19
2:05 PM Page 19