How To Operate - HoMedics CIRCULATION PRO Instruction Manual

13-0095 CB200-CA_IM_E_vE.qxd:Layout 1

HOW TO OPERATE

For Foot – SOLE
1. Place your bare feet onto Circulation P ro (do not wear socks).
2. Press the on/o button, the LCD screen will light up in Orange. The
program shows AUTO and both Bands show 00, which is in standby
mode (see Fig. 1).
3. Gently increase intensity setting by pushing the button "SOLE +". Or
decrease intensity setting by pushing the button "SOLE -". The intensity
level is adjustable between 0 and 99. The LCD display will show the
selected level (see Fig. 2).
4. You can adjust the auto o timer by pressing the "Time –" or "Time +".
Timer ranges from 1-60 minutes. The timer will begin to count down
from the time you selected (see Fig. 3). To terminate the massage period,
user can turn o the unit anytime by pressing the on/o Button once.
5. If you are satis ed with the current massage program, you can lock the
current massage program by pressing the Auto/Mode key. The rest of the
massage time will then only run the selected massage program
(see Fig. 4).
IMPORTANT INFORMATION:
a. The aim is not to get up to level '99' .
b Chose an itensity level that is comfortable for you! This level may very
from day to day.
c. Remember to drink plenty of uids – if you are dehyrdated, this will
reduce the e ectiveness of the device
7/2/13 2:05 PM Page 13
13
Fig. 1
Fig. 2
Fig. 3
Fig. 4