Motorola OJO User Manual page 41

Appendix 3 – Startup Connections
6 After you select the desired method, press SELECT.
If you selected Static IP Address, you need to enter the following
7
information: IP Addr, DNS 1, DNS 2, Mask, and Route.
Important: Before entering any Static IP Address information,
contact your Internet Service Provider (ISP) to obtain the correct
address information. Entering incorrect information will render your
Ojo inoperable.
Write the address information obtained from your ISP in the spaces
below:
IP Addr: _ _ _ . _ _ _ . _ _ _ . _ _ _
DNS 1: _ _ _ . _ _ _ . _ _ _ . _ _ _
DNS 2: _ _ _ . _ _ _ . _ _ _ . _ _ _
Mask: _ _ _ . _ _ _ . _ _ _ . _ _ _
Route: _ _ _ . _ _ _ . _ _ _ . _ _ _
Using the numeric keypad, enter the address information you
8
obtained from your ISP. Use the
move to different Static IP address fields.
Note: Use to enter a dot [ . ].
Press SELECT when the address information has been entered.
9
Press to save your Connection settings. Ojo prompts you to save
10
the settings. Choose "Yes" to save the settings and return to the Main
Menu.
Press END to return to the Home screen.
11
Resetting Network Connection
On the Home screen, press
1
press SELECT. The Main Menu is displayed.
2 Highlight and select Connection to display the Connection screen.
Press or to highlight Reset Connection and press SELECT. Ojo
3
prompts you to reset the network connection. Choose "Yes" to
reacquire your network connection, or "No" to return to the
Connection screen.
and keys on the handset to
or to highlight MAIN MENU and
41