Base Unit - Panasonic KX-TD7895 Operating Instructions Manual

L
OCATION OF
B U
ASE NIT
1
Connect as shown.
2
Raise the antenna.
LOCATOR Button
Used to locate the handset.
DIALING MODE Selector
On mode:
SLT
If your telephone line leads to
touch tone service, set to "TONE".
If your telephone line leads to rotary
service, set to "PULSE".
CONNECTION MODE Selector
If the unit is connected to a Telephone Line
Jack or a PBX (except for Panasonic KX-T,
KX-TA or KX-TD series), set to "SLT".
If the unit is connected to Panasonic KX-T,
KX-TA or KX-TD series, set to "EMSS".
THE AC OUTLET POWER SOCKET SHOULD BE LOCATED NEAR THIS
EQUIPMENT AND BE EASILY ACCESSIBLE.
N :
OTE
• Use ONLY Panasonic AC ADAPTOR PQLV1. The adaptor must remain
connected at all times.
• The AC adaptor may feel warm. This is normal.
• The unit will not function during a power failure.
• This unit cannot be connected in parallel with a single line telephone.
• If the unit does not operate after connecting the AC Adaptor to the AC Outlet,
disconnect the AC Adaptor once and re-insert it.
6
C
ONTROLS AND
C
ONNECTION
Fasten the AC adaptor
cord to the cord holder.
To AC Outlet
(120 V AC, 60 Hz)
AC Adaptor
(PQLV1)
To Telephone
Line Jack (RJ14C)
or PBX.
Telephone Line Cord