Table 2-17 Basic Tones - NEC univerge SV9100 Programming Manual

Issue 4.0
Item
No.
02 Override Mailbox Category
(Override MB Ctg)
Specify the category of the mailbox where Automated
Attendant calls should route when you enable Answer
Schedule Override. VM8000 InMail mailbox categories
are Subscriber Mailbox, Master Mailbox, and Routing
Mailbox.
VM8000 InMail handles the routing according to the type
of mailbox (Subscriber, Call Routing, or Announcement)
within the specified category:
If the Override Mailbox is a Subscriber Mailbox, the

outside caller hears the mailbox greeting (if
recorded) and can leave a message.
If the Override Mailbox is an Announcement

Mailbox, the outside caller shears the recorded
announcement. Depending on how the
Announcement Mailbox is programmed, VM8000
InMail then hangs up, reroutes the call, or provides
additional dialing options.
If the Override Mailbox is a Call Routing Mailbox, the

outside caller hears the instruction menu and can
dial any option allowed by the associated Dial Action
Table.
If any of the Input Data values are entered, the

terminal displays the Override Mailbox Number
selection (below).
Override Mailbox Number
(Override MB Num)
Specify the mailbox where Automated Attendant calls
should route when you enable Answer Schedule
Override. The mailbox number you select in this option
should match the mailbox category specified in 47-11-02:
Override Mailbox Category above.
SV9100 Programming Manual
Item Input Data
0 (Undefined)
1 (Subscriber Mailbox – STA)
2 (Group Mailbox)
3 (Routing Mailbox)
Digits
(three maximum, using 0~9)
Default
0
No Entry
2-601