3. Disassembly and Reassembly
3-2. Standard Disassembly Drawings
Part
Thermistor
3-2
Photo
Description
1. Place the dishwasher on its back so that you can
see the base. Remove the two (2) screws that hold
the base and the shutter in place.
2. Remove the leakage sensor connector (white) inside
the shutter.
3. Disconnect the wire terminal (blue) connected to the
thermistor.
4. Check the location of the thermistor and remove the
two (2) screws that hold the thermistor to the case
sump.