Disassembly And Reassembly; Tools For Removal And Reassembly - Samsung DMR78AHS/XAC Service Manual

3. Disassembly and Reassembly

3-1. Tools for Removal and Reassembly

Tool image
No.
Adjustable Wrench
➊
Open-end Wrench
➋
➌
➍
(screwdriver, nipper, long nose pliers)
* Preparation for parts replacement
1. Take out the residual water inside the product.
(Drain the water by operating the drain pump)
2. Close the water supply valve.
3. Turn off the power & disconnect power cable.
You must turn off the circuit breaker connected to the product.
4. Pull out the unit from the sink and lay it on the floor.
Be careful of the drain hose when pulling out the unit.
Tool Type
1-7/16"
Vice pliers
Others
Leg
Common tools for servicing
Screwdriver - Philips, flat, Torx T20
3. Disassembly and Reassembly
Remarks
3-1