Changing The Flash Time; Setting The Area Code; Reset Base - GE 22437 User Manual

needs.
Press key.
Press or key to select SETUP BS and press
key.
Press or key to select DIAL MODE and press
key.
Press or key to select TONE or PULSE.
Press key to confirm the setting.

Changing the Flash Time

You may select flash time form 100ms to 800ms according to your
needs. The default setting is 600ms.
Press key.
Press or key to select SETUP BS and press
key.
Press or key to select
key.
Press or key to select the desired flash time
(100ms/120ms/250ms/270ms/300ms/370ms/600ms/800ms).
Press key to confirm the setting.
VMWI
If you have subscribed to a voice messaging service, the VMWI LED
on the base will flash to alert you if you have a messages waiting.
To turn Visual Message Waiting Indication (VMWI) off
Press the key
Press or key to select SETUP BS and press
key.
Use the or keys to scroll to VMWI and press the
key again
You will be prompted VMWI OFF?.
Press the to confirm the setting.

Setting the Area Code

If the area code is set, even you enter the area code before the
telephone number, the area code will be cut and will not be dialed.
Press the key
Press or key to select SETUP BS and press
key.
Use the or keys to scroll to AREA CODE and press
the key again
Input the area code number and then press the
the setting.

Reset Base

This option allows user to restore the base and Date/Time to the
default setting.
Press the key
Press or key to select SETUP BS and press
key.
Use the or keys to scroll to RESET and press the
key again
Enter the PIN (factory setting =0000) and press
confirm, the LCD will display RESET?.
Press key to confirm the setting.
Date / Time
You can set the Date/Time displayed in idle mode.
Press key.
Press or key to select DATE/TIME and press
key, the LCD will display YEAR 2007.
Input the correct last two digits of year (range: 00-99) using
FLASH TIME and press
to confirm
– 14 –
key to