Base Station Settings; Using The Handset; Barring Calls; Changing The Flash Time - GE FS21828 User Manual

Base Station Settings

(using the Handset)

Barring Calls

The following options are available for selection for barring calls:
Option Description
DISABLE All telephone calls are possible.
EXTERNAL All external calls are barred.
NUMBER Define a number which should be barred, e.g. 0190
Press key until the BASE menu appears and press
"INT/OK" key.
Press or key to select the required submenu and press
"INT/OK" key.
Enter the PIN (factory setting is 0000) and press "INT/OK"
key.
Use or key to select the handset which should be
barred and press "INT/OK" key.
Use or key to select an option and press "INT/OK"
key.
Entering/Changing Emergency Number
Emergency numbers are free of any restriction, i.e. they can still be
called even if call barring of any kind is set.
Before emergency numbers can be used, they must be stored. The
emergency numbers can then be dialed manually or from the phone
book if they are stored there.
Two different emergency numbers (maximum of five digits) can be
programmed. Example: three digit emergency number = 123. All
numbers which begin with 123 are dialed even if the unit is only
programmed for internal calls.
Press key until the BASE menu appears and press
"INT/OK" key.
Press or key to select the required submenu and press
"INT/OK" key.
Enter the PIN (factory setting = 0000) and press "INT/OK" key.
Use or key to select the emergency number to be
changed and change it.
Press "INT/OK" key.
Note: Save the emergency numbers in the phone book, too
(refer to chapter "Phone Book"), e.g. with self explanatory
names such as "Doctor" or "Fire". If these numbers should
be positioned at the top of the phone book list in the
display, enter a space preceding the name "DOC" and
"FIRE".
Ringer
Press key until the BASE menu appears and Press
"INT/OK" key.
Press or key to select the required submenu and Press
"INT/OK" key.
Press or key to select the ringer volume and Press
"INT/OK" key.
Press or key to select the ringing melody and Press
"INT/OK" key.

Changing the Flash Time

Press key until the BASE menu appears and press
"INT/OK" key.
Press or key to select the required submenu and press
"INT/OK" key.
Press or key to select the required flash time and
press "INT/OK" key.

Changing the Dialing Mode

Press key until the BASE menu appears and press
"INT/OK" key.
12