Set Up Conference Using Hookflash; Drop Conference Party Using Hookflash; Set Up Conference - Cisco 6901 User Manual

Set Up Conference Using Hookflash

•
The conference ends when all the participants hang up.
Set Up Conference Using Hookflash
This procedure applies to the Cisco Unified IP Phone 6901 only.
Procedure
Step 1 Verify that you are on an active call (not on hold).
Step 2 Press and release the hookswitch to get a dial tone.
Step 3
Dial the desired phone number.
Step 4 Wait for the recipient to answer or skip to Step 5 while the call is ringing.
Step 5 Press and release the hookswitch again.
The conference begins.
Note

Drop Conference Party Using Hookflash

This procedure applies to the Cisco Unified IP Phone 6901 only.
Procedure
Step 1 Verify that you are in a conference.
Step 2 Press and release the hookswitch.
The party who joined last is dropped from the conference.
Note

Set Up Conference

This procedure applies to the Cisco Unified IP Phone 6911 only.
Cisco Unified IP Phone 6901 and 6911 User Guide for Cisco Unified Communications Manager 9.0 (SCCP and
SIP)
20
Conference button on the Cisco Unified IP Phone 6911.
You can only include three participants in a conference. Use the hookflash feature to drop a participant
from a conference.
Only the conference host can drop a party from a
conference.
Calling Features