Call Waiting; Three-Way Calling; Sending Tones - Audiovox Verizon CDM-9900 Owner's Manual

Call Waiting

If you have Call Waiting service, you may hear a beep tone when
you are on a call alerting you of an incoming call. "New Caller" is
displayed along with the new caller's name and number.
1. To answer the new call, press
2. To switch between the two calls, press

Three-Way Calling

Three-Way Calling allows you to call a third party when a call is
already in progress. This service is system dependent.
1. To call the third party, enter a number and press
2. To connect all three parties, press

Sending Tones

There are three ways to send tone signals to the party during a call.
Sending Tones from Keypad
When "DTMF Send (Menu 716)" (page 100) is on, tone signals are
sent to the party as you press digit keys during a call.
Sending Tones from Display
To send tone signals from the display during a call when "DTMF
Send (Menu 716)" (page 100) is off:
1. Enter the number during a call.
2. Press the right softkey under
press .
Sending Tones from Memory
To send tone signals from the phonebook memory during a call:
1. Press the left softkey under
book then press
2. Select the number you want to send in tone signals then press the
right softkey under
.
VAD
Options
Menu
to find a number.
Options . Select Send Tone then press
again.
VAD
VAD
again.
VAD
, select Send Tone then
during a call, select Phone-
Chapter 2
.
.
33