Table of Contents
Advertisement
Prepending Dialing
Convenient for adding an area code to a number from the phonebook.
1. From the standby mode, press the right softkey under
2. To display the details screen, select the entry then press
3. Select the phone number then press the right softkey under
Options
.
4. Select Prepend Dial then press
5. When Prepend Dial screen appears, enter the digits you want to
add, then press
Note:
Added digits are only applied for the current call.
Dialing Numbers with Pauses
To dial a phone number with hard pause (P):
1. From the standby mode, press the right softkey under
2. Select the entry then press
3. Select the number then press
dialed.
4. Press
again. The additional number will be sent in tone signals.
VAD
5. Succeeding numbers can be sent sequentially by pressing
To dial a phone number with two-second pause (T):
1. From the standby mode, press the right softkey under
2. Select the entry then press
3. Select the number then press
dialed. With two-second pause, the additional number will auto-
matically be sent in tone signals.
Note:
To save phone numbers with pauses, see "Digits Options" on page 44.
to dial.
VAD
VAD
VAD
.
to display the details screen.
. The phone number will be
to display the details screen.
. The phone number will be
Contacts
.
.
Contacts
.
.
VAD
Contacts
.
47
Chapter 3
Advertisement
Table of Contents
