Using Caller Id; Responding To Call Waiting; Making A Three-Way Call - Audiovox 8912 User Manual

Using Caller ID

Caller ID allows people to identify a caller before answering the
phone by displaying the number of the incoming call. If you do not
want your number displayed when you make a call, just follow these
easy steps.
To block your phone number from being displayed for a specific
outgoing call:
1.
Press
2.
Enter the number you want to call, then press
Note:
To permanently block your number, call your service provider.

Responding to Call Waiting

Call Waiting notifies you of another incoming call when you are on
the phone by making a beep sound and displaying the caller's phone
number on the screen.
To answer another call while on the phone, press
(This places the first call on hold. To switch back to the first
caller, press
Tip:
For those calls where you don't want to be interrupted, you can temporarily
disable Call Waiting by pressing
Call Waiting is automatically reactivated once you end the call.

Making a Three-Way Call

With Three-Way Calling, you can talk to two people at the same time.
When using this feature, the normal airtime rates will be applied for
each of the two calls.
1.
Enter a number you wish to call then press
2.
Once you have established the connection, enter the second
number you wish to call then press
highlight 3-Way Call then press
on hold and dial the second number.
3.
When you're connected to the second party, press
begin your three-way call.
Section 3A: Your Carrier Service Features – The Basics
.
again.)
.
before placing your call.
.
(or press
[OK]) to put the first caller
.
[Menu],
again to
123