Genie WIP1VD User Manual page 2


Please use the specified power supply to connect.

Do not attempt to disassemble the camera; in order to prevent electric shock, do not
remove screws or covers.

There are no user-serviceable parts inside. Please contact the nearest service center as
soon as possible if there is any failure.

Avoid from incorrect operation, shock vibration, heavy pressing which can cause
damage to product.

Do not use corrosive detergent to clean main body of the camera. If necessary, please
use soft dry cloth to wipe dirt; for hard contamination, use neutral detergent. Any
cleanser for high grade furniture is applicable.

Avoid aiming the camera directly towards extremely bright objects, such as, sun, as this
may damage the image sensor.

Please follow the instructions to install the camera. Do not reverse the camera, or the
reversing image will be received.

Do not operate it incase temperature, humidity and power supply are beyond the limited
stipulations.

Keep away from heat sources such as radiators, heat registers, stove, etc.

Do not expose the product to the direct airflow from an air conditioner.

This is product instructions not quality warranty. We may reserve the rights of amending
the typographical errors, inconsistencies with the latest version, software upgrades and
product improvements, interpretation and modification. These changes will be published
in the latest version without special notification.

When this product is in use, the relevant contents of Microsoft, Apple and Google will
be involved in. The pictures and screenshots in this manual are only used to explain the
usage of our product. The ownerships of trademarks, logos and other intellectual
properties related to Microsoft, Apple and Google belong to the above-mentioned
companies.

This manual is suitable for network camera. All pictures and examples used in the
manual are for reference only.
Notes on Safety