How to Stop Engine (See fig 10 - 12)
All loads MUST be disconnected from the generator. Never start or stop the engine with electrical devices plugged in to
the receptacles.
Turn the engine START/ON/OFF switch to the "OFF" position.
Turn the
Mechanical Switch(Engine)
Fig 10
Receptacles and Extension Cords
Only use high quality, well-insulated, grounded extension cords in good condition with generator receptacles. Follow
each load manufacturer's power rating recommendation when selecting receptacle and extension cord.
Extension Cord Selection
Refer to the below table to ensure the extension cord used has the capacity to carry the required load. If the size of the
cable is inadequate it can cause a voltage drop, which can damage the electrical device and cord.
to the "OFF" position.
Fig 11
OPER
TION
A
15
PUSH
Fig 12