Nokia 6267 RM-210 Service Manual page 99

RM-210
RF troubleshooting
3. Click Start to activate the settings.
If the settings are changed later on (for example, change of channel) you have to click Stop and Start
again.
Note: Clicking Stop also disables TX control if it was active.
4. From the Phoenix testing menu, select WCDMA→RX Power measurement
5. In the RX Power measurement window, select:
• Mode: RSSI
• Continuous mode
6. Click Start to perform the measurement.
Issue 1
Figure 15 RX Control window with example settings
COMPANY CONFIDENTIAL
Copyright © 2007 Nokia. All rights reserved.
Page 4 –13