Service Devices; Product Specific Devices - Nokia 6267 RM-210 Service Manual

RM-210
Service Devices and Service Concepts

Service devices

Product specific devices

The table below gives a short overview of service tools that can be used for testing, error analysis and repair
of product RM-210, refer to various concepts.
Issue 1
FS-53
• FS-53 is equipped with a clip interlock system
• provides standardised interface towards Control Unit
• provides RF connection using coupler
• multiplexing between USB and FBUS media, controlled by VUSB
MJ-116
MJ-116 is meant for component level troubleshooting.
The jig includes an RF interface for GSM, WCDMA and Bluetooth. In
addition, it has the following features:
• Provides mechanical interface with the engine module
• Provides galvanic connection to all needed test pads in module
• Multiplexing between USB and FBUS media, controlled by Vusb
• MMC interface
• Duplicated SIM connector
• Connector for control unit
• Access for AV- and USB connectors
Note: Be careful when closing the jig, not to harm the display
with the screws on the jig!
RJ-182
RJ-182 is a soldering jig used for soldering and as a rework jig for the
engine module.
COMPANY CONFIDENTIAL
Copyright © 2007 Nokia. All rights reserved.
Flash adapter
Module jig
Soldering jig
Page 2 –5