Connections & Wiring - AvMap Ultra EFIS User And Installation Manual

2.3 Connections & wiring
On the back of the unit there are 4 connectors: the pitot port, the static port, the power supply
connector, and the GPS receiver connector (see Figure 5).
Efis Ultra
(rear view)
Static
Pitot
Power
GPS
& I/O
10 wires cable
Connection to the pitot-static system
In order to display accurate speed and altitude data the Ultra EFIS needs to be connected
to the aircraft pitot-static system. First of all remove the two caps protecting the STATIC
and PITOT ports. Installation along with other mechanical or digital altimeters and airspeed
indicators is supported by mean of a T coupler (not included in the Ultra EFIS box).
Static Port
Static
Pitot
8 - User and Installation Manual
GPS
RECEIVER
Altimeter Airspeed Indicator
GPS
receiver
AvMap Ultra EFIS
Figure 5
Pitot Tube
Figure 6
Con
On th
conne
and th
A free
direct
suppl
device
Co
port
static
STAT
into
tubes
(0.2 in
Co
the bo
Pow
suppl
the 1A
to pro
Con
On th
conne
and th
A free