Setup Mode - AvMap Ultra EFIS User And Installation Manual

AvMap Ultra EFIS
ADF menu
On the HSI display mode menu, select ADF to enter the ADF menu.
In the ADF menu you can select an Airport (ARPT), VOR and NDB as your Automatic
Direction Finder point.
BUG
On the HSI display mode menu, select BUG to setup the BUG on the HSI. Use the
rotation knob to select the BUG direction and confirm by pressing the rotation knob. The
BUG is shown on the compass in magenta colour, both on the HSI and PFD display.

4.4 Setup mode

To enter the Setup display mode from either the PFD or HSI display mode keep the
rotation knob pressed for 5 seconds.
The Setup menu display mode provide you information regarding the Software Version,
enabled COM ports, V-speed values and Display brightness.
In the Setup mode push the rotation knob to enter the Setup menu:
In the Setup Menu you can enter the following menu's:
• CALIBRATE: To calibrate the magnetometer (Compass) and AHRS (Horizion).
• DATABASE: To update the Navdata POI's.
• SETUP: To change display brightness, configure the aircraft specific V-Speed values
and change units measurements.
Note: For Magnetometer and AHRS calibration see Chapter 3.
Aircraft Specific V-Speed reference values
Select SPEEDS in the Setup menu to enter the V-Speed reference values shown on
the bottom of the SETUP display mode.
Rotate the rotation knob to change values and push the rotation knob to confirm.
Refer to the aircraft operating manual to find the correct values of your aircraft.
Navdata POI management
Ultra EFIS is preloaded with Jeppesen Navdata POI's: Airports, NDB's and VOR's.
In the Database menu you can choose to IMPORT navdata to the Ultra EFIS through
the microSD card.
Make sure the microSD card is inserted in the Ultra EFIS.
Navdata Update
To update the navdata on your Ultra EFIS visit www.avmap.it and purchase the latest
navdata update.
When you purchase an update, you'll receive a navdata file. Save the navdata file on
your PC and copy it on the microSD card.
To import the navdata update from the microSD to the Ultra EFIS insert the microSD in
to the device, go to the Database menu and select IMPORT.
After the update is completed, turn off the device and start it up again.
User and Installation Manual - 19