Chapter 5 Layering - Kurzweil M210 User Manual

Layering
Chapter 5
This function lets you layer and play two different
sounds at the same time. You can layer voices of two
different voices in the same category, and create a
composite voice of greater richness and texture.
Select the main voice in the usual way with the [Voices],
the [Next] or the [Previous] button if needed.
The primary(main) voice is "Grand Piano" by default.
Then press the [Layer] button and use the [Next] or
the [Previous] button to select a voice to be layered
with the first one.
The secondary(layered) voice is "Strings" by default.
"L" means that Layer(secondary) sound.
"15" means that voice number (page 13).
If you want, use the [Volume] button to adjust the
volume balance between two voices in layer mode.
I t can be set to any number between 0 and 127.
By default, the Layer Volume is setting to 70, which
results in the secondary sound being a little softer than
the primary(main) sound.
You can not change the primary sound volume. It is
always setting to max 127.
The sustain pedal can be enabled or disabled while
you are in layer or split mode. While holding down
the [Layer] button or [Split] button, press the sustain
pedal.
8
1 4 Layering