Specifications - Peavey CS 3000G Operating Manual

Output Power: (typical value)
Stereo mode, both channels driven
2 ohms, 1 kHz, 1% THD: 1500 W RMS per channel
4 ohms, 1 kHz, 1% THD: 1000 W RMS per channel
8 ohms, 1 kHz, 1% THD: 600 W RMS per channel
Bridae mode, mono
4 ohms, 1 kHz, 1% THD: 3000 W RMS
8 ohms, 1 kHz, 1% THD: 2000 W RMS
Rated Output Power:
Stereo mode. both channels driven
4 ohms, 20 Hz to 20 kHz, 0.04% THD: 900 W RMS
per channel
8 ohms, 20 Hz to 20 kHz, 0.04% THD: 550 W RMS
per channel
Power Bandwidth: (typical value)
Stereo mode. both channels driven
Slew Rate: (typical value)
Stereo mode, each channel: 40 volts per FSec
Bridge mode, mono: 80 volts per uSec
Total Harmonic Distortion: (typical)
Stereo mode. both channels driven
20 Hz to 20 kHz, 4 ohm rated load: < 0.04%
Input Sensitivity & Impedance:
Input attenuator set @ FCW
k ohms (+33 dB)
20

SPECIFICATIONS

Frequency Response: (typical value)
Stereo mode. both channels driven
Damping Factor: (typical value)
Stereo mode, 8 ohms, 1 kHz: > 300
Hum & Noise:
Stereo mode, below rated power. 4 ohms
100 dB, unweighted
Power Consumption:
Stereo mode, both channels driven
13A @ 230VAC
Cooling System:
Dual, 2-speed fans
DDT Compression System:
Switchable with LED
Dimensions 81 Weight:
Height:
Width:
Depth:
Weight:
Three-Rack Space, Class BG, Dual-Rail Design with
NSSER Topology (NSSER: Nonsaturating Series Single
Emitter Resistor).
Patent Pending.
8
(8.9 cm)
5"
35 Ibs. (15.9 kg)