To Place A Call With The Manual Pin Entry; To Place A Call With The Automatic Pin Feature; To Place A Call To Voice Mail Using The Automatic Pin Feature; To Turn The Automatic Pin Feature On/Off (F54-5) - Audiovox CDM-4000 XL Owner's Operating Manual

To Place a Call with the Manual PIN Entry

1. Enter the number you are calling, or recall the
number from a specific memory location.
2. Press . Your call will be processed. Listen
for a double beep, which will prompt you to send
your PIN.
3. Enter your PIN number, and press
call will then be placed.

To Place a Call with the Automatic PIN Feature

1. Enter the number you are calling, or recall the
number from a specific memory location.
2. Press "SEND" key
processed, you will have
the display:
3. Press "SEND" key
be placed.
Note: Before you can use this feature, you must pro-
gram your PIN and turn the Automatic PIN fea-
ture on. (See procedures below.)
To Place a Call to Voice Mail using the
Automatic PIN Feature
(See Voice Mail Dialing on page 44.)
1. Press for more than one second. As your call
V
is being processed, you
will have the display:
2. Press again, your PIN will be sent.
V
3. Press again. The second number stored in
V
will be sent in Touch Tone™ signals. The sub-
V
sequent numbers, if any, can be sent sequentially
by pressing .
V

To Turn the Automatic PIN Feature On/Off (F54-5)

1. Press
5 4
F
JKL
.
5
JKL
2. You can turn this feature on/off by
3. Press to set.
F
. As your call is being
again. Your call will then
and
GHI
or
63
. Your
.