Table of Contents
Advertisement
7U
4_ I
# # @' i
# # 411
# I
# i
# # i
# # # I
I_ # i
# @ i
# # I
i
,t- #- _i # # _ i
@ ,1- ¢ 0 @ # @ I
_ _ ,I @ @ +_
Specialized Storage Areas
Your refrigerator has an Adjusti-Temp
TM
meat storage
To remove this drawer for cleaning:
drawer. This drawer is designed to provide a short term
storage area for fresh meats, cheeses and luncheon
• pull the drawer out until it stops
meats.
• lift the drawer up slightly and pull it out
The Adjusti-Temp
TM
Drawer is the top drawer in the
To replace the drawer:
fresh food compartment.
The temperature control for
this drawer is located on the shelf front above the draw-
• reverse above procedure
er. Slide the control left or right to achieve the desired
I
I
internal temperature of the drawer. The "cool" setting
For best results, keep this drawer dosed tightly.
provides a temperature similar to that of the surrounding
fresh food compartment, The "cold" setting provides a
lower temperature within the drawer which is recom-
mended when storing fresh meat, poultry or fish.
cool E
coLo
+4
.....
The Crispers are ideal for storage of fruit and vegetables.
*Maytag Automatic Humidity
Controlsystemfeatures
a unique,
patent-
They are equipped with an automatic humidity control sys-
ed material
called Shape Memory
Polymer
(SMP) that when laminated
tern.
to fabric, becomes DIAPLEX. DIAPLEX is manufacturedby
Mits[lbishi.
DiAPI.Et'
Automatic
Humidity
Control
T_+,.,+,,,++.,_..,_..
A fabric-like material* covers small air vents in the shelf
To remove a crisper drawer for cleaning:
insert above the crispers.
• pull out the crisper until it stops
This material controls the flow of moisture out of the crisper
• tilt the drawer front up and pull it out
to provide the optimum environment for your food. If a
food spill should occur on the air vent or fabric-like
To replace a crisper drawer:
material, wipe with a clean, damp cloth.
• align the drawer in the tracks
• lift the drawer front and slide in
+tltllllllllllllll
<" J
*i¢iOOii
¢i*
•
@¢
i
The sealed cover of the top drawer serves as the lower refrigerator shelf.
To remove the cover:
To replace the cover:
• lift the front edge of the shelf
• set the rear bars on the support
• pull the shelf straight out
• push the shelf back until the front edge can be lowered
into place
Advertisement
Table of Contents
