Table of Contents
Advertisement
1. Power Switch: Power on/off switch for tuner.
2. Memory Presets: Quick access to stored AM/FM radio stations (1-10).
3. Display: 2 Row, 32 character LCD display
4. Remote Sensor: Infrared sensor for remote control.
5. Down / Up: Press to decrease / increase the receiving frequency.
(By increments of:- AM: 0.09KHz - FM: 0.05MHz)
6. Band: Changes tuner between AM and FM modes.
7. Direct: This function allow you to select a specific radio frequency directly.
8. Sleep: This button allows a sleep timer to be set
9. ME-Down/Up: Toggles through the stored radio stations.
10. Memory: Used to manually set a memory pre-set.
11. ASM: Auto Search and Memory function.
12. MO/ST: Press this button to change the tuner between Mono and Stereo modes.
(Stereo mode will only be available if the signal is of sufficient strength)
13. AM Input: Spring terminals for supplied AM loop antenna. (For weak signal areas
it is advised for an external aerial to be connected)
14. FM Input: 75Ω FM coaxial antenna input. (For weak signal areas it is advised for
an external aerial to be connected)
15. XLR Outputs: Balanced audio signal outputs (left and right), for connecting to
mixer or amplifier.
16.
Power Input: IEC socket for supplied power lead.
17.
IR Remote: Full function IR remote control.
18.
Removable Rack Ears: Allows unit to be mounted into a 19" rack or removed
for stacking.
Extra buttons on remote control:
RDS : Change RDS functions : PS – PTY – RT - CT
+10/-- : Used to advance through the memory pre-sets by +10.
Mute : Press to mute the audio output, press again to resume audio.
5
Advertisement
Table of Contents
