Table of Contents
Advertisement
4. Select the registration information that
has been saved and click on "Open."
The "OmniPass import user" window will
appear.
5. Enter a user name, a domain, and a
password, then click on "Next."
The message "User import of OmniPass has
been completed" will be displayed.
Enter the same user name and password to
be used in logging on to Windows.
34
LB_GAURA (24-37) EN
How to confirm domain
"Domain" for setting the registration
information for fingerprint authentication
can be checked by the following
procedure.
1. Click on "Start."
2. Right-click on "My Computer," and
3. Click on the "Computer Name" tab.
4. A name that has been set to "Full
6. Click on "OK."
7. Restart your computer.
Restar ting the computer enables the
registration information that has been read
(imported) to be effective.
34
click on "Properties" in the menu
to be displayed.
The "System Properties" window will
appear.
computer name" is "Domain."
13/11/06, 05:34 pm
Advertisement
Table of Contents
