Table of Contents
Advertisement
To install or remove a memory module,
hold it by the edge and be careful not to
touch any component and IC chip.
Memory module is made of materials
sensitive to human body static charges.
Before handling a memory module,
always touch an appropiate metal object
to discharge static charges from your
body.
Please remember to turn off the notebook
before you begin to install or remove a
memory module. If the notebook is placed
in standby or hibernate mode while the
memory is removed, data may be lost or
corrupted. This may also damage the
memory module.
1. Turn off the notebook and disconnect the
AC adapter from it.
2. Close the LCD panel and place the
notebook upside down.
3. Remove the screws (two) securing the
memory compartment slot cover and
remove it.
Remove the battery compartment cover at
the bottom of the notebook.
LB_GAURA (19-23) EN
4. Install the memory module
5. Attach the memory compartment cover
Memory
compartment
cover
21
U s e r - I n s t a l l a b l e Fe a t u r e s
Insert the memory module into the slot with
the notch in the memory module aligned with
the projection on the connector, and push
the memory module down unit it locks in
place with a click sound.
Notch in the module
and secure it with screws.
Attach the cover removed in step 3.
13/11/06, 05:33 pm
Memory
compartment
cover
21
Advertisement
Table of Contents
