Table of Contents
Advertisement
Configuration of registration
information
Registration information is set up in the following
configuration.
To use fingerprint authentication, it is necessary
to register the user's fingerprint.
Registration information on
fingerprint authentication (User
name and password are just an
example.)
• User name
This is the user's name for which a fingerprint
has been registered. It is necessary to give
the same name as used for logging on to
Windows.
• Domain
The full name of the computer is displayed.
• Fingerprint
Fingerprints are registered.
• Password
The user's password for a user whose
fingerprint has been registered. It is
necessary to use the same password to be
used in logging on to Windows.
• Log-in information on homepages
Register an ID (user name) and a password
beforehand, so that homepages that require
entering an ID (user name) and a password
can be viewed just by authenticating
fingerprints.
LB_GAURA (24-37) EN
Register log-in information
on homepages
To log into homepages of which security is set
up, you may have to enter log-in information such
as an ID (user name) and a password.
With fingerprint authentication, you can log in
these homepages by only sliding your finger onto
the fingerprint sensor if log-in information is
previously memorized for specific homepages.
Register log-in information according to the
following procedure.
1. Display a homepage you want log-in
2. Enter log-in information.
25
U s i n g F i n g e r p r i n t Au t h e n t i c a t i o n
Register log-in information on
homepages
informating to be registered.
• When directly registering log-in information
to homepage.
Do not press the "Sign-in" button, etc.
13/11/06, 05:34 pm
25
Advertisement
Table of Contents
