Section 2. Getting Ready To Sew Connecting Machine To Power Supply; Before Using Your Sewing Machine; For Your Safety; Polarized Plug - New Home NH1722S Instruction Manual

NH1722S Instruction Manual
SECTION 2. GETTING READY TO SEW
Connecting Machine to Power Supply
1 Power supply plug
2 Power switch
3
Outlet
4 Machine socket
5 Machine plug
6 Sewing light
Before connecting the power cord, make sure the voltage
and frequency shown on the machine conform to your
electrical power.
1. Turn off the power switch
2. Insert the machine plug
3. Insert the power supply plug
4. Turn on the power switch

Before Using Your Sewing Machine

Before using your sewing machine for the first time, place a
waste fabric under the presser foot and run the machine
with thread for a few minutes. Wipe away any oil which may
appear.

For Your Safety

* While in operation, always keep your eyes on the sewing
area. Do not touch any moving parts, such as the thread
take-up lever, handwheel or needle.
* Always turn off the power switch and unplug from the
power supply:
- When leaving the machine unattended
- When attaching or removing any parts
- When cleaning the machine
* Do not place anything on the foot control, when not
sewing.

Controlling Sewing Speed

Sewing speed can be varied by the foot control.
The harder you press on the foot control, the faster the
machine runs.
www.toews.com
.
2
into the machine socket
5
into the outlet .
3
1
.
2
4 .
4
4
2
1
5
1722S Owners Manual/ User Guide
3