Safety Instructions - Festool C 15 Li Original Operating Manual/Spare Parts List

Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 12
C 15 Li, C 18 Li
GB
Original operating manual
1
Symbols
Symbol Significance
Warning of general danger
Risk of electric shock
Read operating instructions and safety
notices!
Wear ear protection.
Wear protective gloves.
Wear a dust mask.
Wear protective goggles.
Do not dispose of with domestic waste.
Tip or advice
Handling instruction
Mains voltage (input) and frequency
Voltage (output)
Rapid charging max.
Permitted temperature range
Safety class II
Charging times
Capacity
Weight
2

Safety instructions

2.1
General safety instructions
WARNING! Read all safety warnings and all
instructions. Failure to follow the warnings
and instructions may result in electric shock, fire
and/or serious injury.
Save all warnings and instructions for future ref-
erence.
The term "power tool" in the warnings refers to
your mains-operated (corded) power tool or bat-
tery-operated (cordless) power tool.
2.2
Machine-specific safety notices for cordless
drills
– Hold power tool by insulated gripping surfaces,
12
when performing an operation where the cut-
ting accessory or fastener may contact hidden
wiring. Cutting accessory or fasteners contacting
a "live" wire may make exposed metal parts of the
power tool "live" and could give the operator an
electric shock.
– Use suitable detectors to determine if utility
lines are hidden in the work area or call the lo-
cal utility company for assistance. Contact with
electric lines can lead to fire and electric shock.
Damaging a gas line can lead to explosion. Pene-
trating a water line causes property damage or
may cause an electric shock.
– Wear suitable protection: such as ear protection,
safety goggles, a dust mask for work which gener-
ates dust, and protective gloves when working with
raw materials and when changing tools.
CAUTION! Power tool can block and cause
sudden kickback! Switch off immediately!
– Hold the power tool firmly in your hand. Adjust
the torque correctly for screwing. Be prepared
for a high reaction torque, which may cause the
power tool to turn and possibly lead to injury.
– Do not use the power tool in the rain or in damp
surroundings. Moisture in the power tool may
cause a short circuit and burning.
– Do not lock the on/off switch permanently!
2.3
Battery pack and charger safety instruc-
tions
– This charger can be operated by persons with re-
duced physical, sensory or mental capabilities or a
lack of practical experience and knowledge, pro-
vided they are supervised or have been instructed
to use the machine safely and understand the dan-
gers of machine operation. Children are not al-
lowed use or play with the machine.
– Do not open the battery pack or the charger!
– Prevent metal parts (e.g. metal chips) or fluids
from entering the charger!
– Risk of explosion! Do not use battery packs or
chargers from other manufacturers!
– Protect the battery pack from excessive heat > 50
°C or constant heat sources such as sunlight or
naked flames!
– Never use water to extinguish burning li-ion bat-
tery packs! Use sand or a fire blanket.
– Check the plug and the cable regularly and
should either become damaged, in order to avoid

Advertisement

Table of Contents
loading

This manual is also suitable for:

C 18 li

Table of Contents