Honda legend Owner's Manual page 506

09/01/28 18:40:04 32SMG631_506
COVER
NOTCH
If you cannot remove the cap,
release the lock with a small flat-
tipped screwdriver. Put a cloth on
the notch, insert a screwdriver and
push it slightly toward the top of
the wiper blade, then slide the cap
outward.
BLADE ASSEMBLY
TAB
Disconnect the blade assembly
3.
from the wiper arm:
Press and hold the lock tab.
Slide the blade assembly toward
the lock tab until it releases
from the wiper arm.
Carefully pull out the blade
assembly to prevent it from hitting
the windscreen.
Wiper Blades
WIPER BLADE
Remove the blade from the blade
4.
assembly:
Find the side of the blade
labelled ''LOCK.'' This is the
side you pull out.
Pull back the end of the blade
assembly on the ''LOCK'' side of
the blade. Then grab the end of
the blade, and slide it out.
CONTINUED
Maintenance
501