Table of Contents
Advertisement
Before using the appliance for the first time
This section tells you everything you need to do before using
the appliance for the first time.
Set the clock
■
Change the language for the text display if required
■
Heat up the cooking compartment
■
Clean the accessories
■
Read the safety information at the start of the instructions for
■
use. This is very important.
Initial setup
Once your new appliance has been connected to the power
supply, the "Uhrzeit einstellen" (set clock) heading appears in
the top line of the display. Set the time, and also the text display
language, if required. German is the default language.
8KU]HLW HLQVWHOOHQ
8KU]HLW
PLW
VFKOLH‰HQ
Setting the clock and changing the language
Press the
X
button to switch to the default time.
1.
Turn the rotary selector to set the current time.
2.
Press the
button to navigate upwards.
Y
3.
Brackets are displayed around "Uhrzeit" (clock).
Use the rotary selector to switch to "Sprache wählen:" (select
4.
language).
Press the
button.
X
5.
Brackets are displayed around "deutsch".
Select the desired language using the rotary selector.
6.
30 different languages are available.
Press the
0
button.
7.
Switching the oven on and off
You can switch the oven on and off with the
Switching on
Press the
button.
%
The initial display including descriptions of the buttons appears.
7\SHV RI KHDWLQJ
3URJUDPPHV
&OHDQLQJ V\VWHP
Select the desired operating mode:
button = types of heating
!
■
button = programmes
`
■
button = cleaning system
p
■
f
button = saved memory setting
■
8
The language and time are applied. The current time is shown
in the display.
Note: You can change the language at any time. See the Basic
settings section.
Heating up the cooking compartment
To get rid of the new cooker smell, heat up the cooking
compartment when it is empty and the oven door closed.
Make sure that the cooking compartment contains no leftover
packaging, e.g. polystyrene pellets.
Ventilate the kitchen while the oven is heating up.
Heat up the cooking compartment to 240 °C using Top/bottom
heating.
Press the
1.
The initial display including descriptions of the buttons
appears.
Immediately press the
2.
The heading "Types of heating" appears in the top line. 3D
hot air and a temperature of 160 °C are suggested in the
settings area. Brackets appear around the type of heating.
Turn the rotary selector to change the type of heating to Top/
3.
bottom heating.
Press the
4.
The brackets now appear around the temperature.
Use the rotary selector to set 240 °C.
5.
Press the
6.
Appliance operation begins. The "Types of heating" heading
disappears. The status bar including the time is shown at the
bottom of the display.
Switch the oven off after 60 minutes using the
7.
The temperature indicator bars show the residual heat in the
cooking compartment.
Cleaning the accessories
Before you use the accessories for the first time, clean them
thoroughly with hot soapy water and a soft dish cloth.
button.
If no button is pressed in the next few seconds, a suggested
%
setting is displayed. This is always the 3D hot air type of
heating and 160 °C.
You can select a different operating mode at any time.
A detailed description of how to make settings is provided in
the individual sections.
Switching off
Press the
appears in the display.
%
button.
!
button.
X
button to switch to the temperature.
button.
n
7\SHV RI KHDWLQJ
' KRW DLU
ƒ&
button. The oven is switched off and the time
%
%
button.
Advertisement
Table of Contents
