Table of Contents
Advertisement
Administration
Recording Status List
Click the [Recording] button of the "Setting Menu" or click the "Recording Status" tab.
The "Recording Status List" menu will be displayed. It is useful to check the status of disk space for each camera
with this page.
Camera No.
Click the desired "Camera No." to perform the set-
tings for the disk space of the selected camera.
If the disk space for the selected camera has
not yet been allocated :
The "Disk Space Allocation for Camera #" menu
will be displayed. (# is the selected camera num-
ber)
If disk space for the selected camera has
already been allocated:
The "Disk Space Setting for Camera #" menu will
be displayed. (# is the selected camera number.)
IP Address
The IP address of each connected camera is dis-
played.
Channel
The channel of each camera connected by the net-
work interface unit is displayed.
Title
The title of each connected camera is displayed.
Recording Status (ASM)
The status of recording (Alarm Recording,
Schedule Recording or Manual Recording) of each
connected camera is displayed.
Red -: Alarm Recording
Blue -: Schedule Recording
Black -: Manual Recording
During recording, "–" becomes "+".
54
Allocated Space (MB)
The allocated disk space for each connected cam-
era is displayed. (Unit size: MB)
Used Space
The used disk space for each connected camera is
displayed as a bar graph. The type of recording
can be identified by the color of the bar graph.
Gray: This color part is used by pre-recording.
Red: This color part is used as protected disk
space by the network camera server. (When
the protected disk space is cleared, the red part
will turn black.)
Blue: This color part is unprotected disk space of
the network camera server.
Black: This color part is unused disk space.
Pre-Recording Time (Sec.)
The pre-recording time (recording time before an
alarm occurs) will be displayed. This will be dis-
played only when both the following are executed:
• On the "Camera Properties" menu of the select-
ed camera, "Allowed" is selected for "Pre-
recording".
• "ON" is selected for " Recording", and a value
of "Duration" for "Pre-Recording" is selected on
the "Alarm Recording" menu.
Comments
The status of the disk space for each connected
camera is displayed.
The following comments will be displayed accord-
ing to the status:
• Formatting the disk space.
• Adding the disk space.
• Deleting the disk space.
• Clearing the protected disk space.
[Previous] link text
When the "Recording Status List" menu has two or
more pages because many cameras are regis-
tered, and the currently displayed page is not the
first page, this link text will be displayed.
Click this link text to display the previous page.
Advertisement
Table of Contents
